{"title":"Fryette","description":"","products":[{"product_id":"fryette-ps100-power-station-100-dual-mode-reactance-amplifier-attenuator","title":"Fryette PS-100 Power Station 100 Dual-Mode Reactance Amplifier\/Attenuator","description":"\u003cp\u003eA unique attenuator and tube amp built into one portable unit.\u003c\/p\u003e\n\u003cp\u003eThe Fryette Power Station 100 Dual-Mode Reactance Tube Amplifier is an easy to use Power Attenuator for controlling the volume of high-powered tube amplifiers with none of the drawbacks of a conventional attenuator. The PS-100 features two sets of remote foot-switchable front panel Volume, Presence and Depth controls for maximum live performance flexibility, and a powerful Dual 6550 100W Mono-Block for unparalleled punch and dynamic range.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWith two sets of foot switchable front panel controls and a foot switchable FX loop, the\u003c\/span\u003e\u003cspan\u003e PS-100 is designed to be transparent, user friendly, reliable and ultra-responsive to a wide \u003c\/span\u003e\u003cspan\u003earray of guitar amplifier and speaker types. It also integrates seamlessly with any combination of internal \u003c\/span\u003e\u003cspan\u003eand external speaker configurations.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIf you have ever used a traditional Power Attenuator, you have already experienced the loss of tone and dynamics of your amplifier at various volume settings, and the frustration with the rotary level switch that always seems one step too loud or one step too quiet. The Power Station not only solves all of those problems, but also provides you with more sonic options in one convenient package:  Preserves tube amplifier tone at any volume setting down to whisper level. Preserves and enhances the dynamic feel and speaker response at any volume. Maintains natural speaker\/power amplifier interactive behavior.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo sets of remote foot-switchable Volume, Presence and Depth controls for maximum live performance versatility.\u003c\/li\u003e\n\u003cli\u003ePost-distortion Foot-Switchable Effects Loop provides a 100% analog signal path.\u003c\/li\u003e\n\u003cli\u003eBalanced XLR and Unbalanced 1\/4” Adjustable Line Outputs for direct recording or live performance signal processing.\u003c\/li\u003e\n\u003cli\u003eTrue Impedance Matching, including 2\/4, 8 or 16 ohms for both the amplifier and cabinet to optimize sonic performance while preventing damage to your amplifier.\u003c\/li\u003e\n\u003cli\u003eRemote bypass function using the Power Station Remote accessory (sold separately).\u003c\/li\u003e\n\u003cli\u003eCompletely safe for any tube amplifier.\u003c\/li\u003e\n\u003cli\u003eA Powerful Re-Amping Tool\u003c\/li\u003e\n\u003cli\u003eAs a re-amper, the Power Station breathes new life and utility into your favorite gear. Now any small amp, preamp or modeler can cut a live gig with a full band.\u003c\/li\u003e\n\u003cli\u003eCrank a mini amp to the threshold of destruction, then adjust the Power Station to preserve the original tone or create an entirely new identity for it.\u003c\/li\u003e\n\u003cli\u003ePerfect as mono power amplifier for guitar preamps, floor preamps and modeling preamps.\u003c\/li\u003e\n\u003cli\u003eIdeal as an effects power amp for a Wet\/Dry amp rig or a monitor power amp for live modeling direct to FOH.\u003c\/li\u003e\n\u003cli\u003eGreat as a desktop power amp for adding tube power to direct recordings for any instrument or signal source.\u003c\/li\u003e\n\u003cli\u003eProtect your delicate vintage mics by keeping speaker cabinet volume low in the studio.\u003c\/li\u003e\n\u003cli\u003eNo A\/D\/A conversion, therefore NO latency.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eSilent Mode\u003c\/h3\u003e\n\u003cp\u003eThe Silent Mode feature provides a versatile reactive load for silent recording using low or high-powered tube amplifiers. In Silent Mode, the Balanced XLR Out and Unbalanced Line Out remain operational even with the AC power disconnected. Note: Unit should remain under power when used with high-powered amplifiers to maintain safe operating temperatures.\u003cbr\u003eThe Power Station 100 provides a variety of performing and recording solutions for every kind of playing or performing application\/environment and breathes new life and functionality into any amp large or small.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eFEATURES\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOutput: 100W of pure tube power @ 4, 8 and16 ohms.\u003c\/li\u003e\n\u003cli\u003eTubes: One 12AX7; two 6550 (Matched Pair).\u003c\/li\u003e\n\u003cli\u003ePower Input (Max continuous): 200W @ 2\/4 Ohms; 150W @ 8 Ohms; 200W @16 Ohms\u003c\/li\u003e\n\u003cli\u003eOutput Impedance: 2\/4, 8 or 16 Ohms, selectable\u003c\/li\u003e\n\u003cli\u003eLoad Amp Impedance: 2\/4, 8 or 16 Ohms, selectable\u003c\/li\u003e\n\u003cli\u003eCan drive a 2 Ohm speaker load, using the 2\/4 Ohm setting\u003c\/li\u003e\n\u003cli\u003eActive safety bypass feature disables internal power amp and maintains critical load on your amplifier if speaker output jack is accidently unplugged.\u003c\/li\u003e\n\u003cli\u003eFront panel controls: A\/B Select switch, Hi\/Lo Input Level switch, High frequency response switch - Flat, Brite, Edge, Low frequency response switch - Flat, Warm, Deep, Volume, Presence and Depth controls, Bypass (standby) switch, Power switch\u003c\/li\u003e\n\u003cli\u003eRear panel features: Amp In, Amplifier Impedance select – 2\/4, 8 or 16 Ohms, Balanced Line Out XLR with Level Control, Unbalanced 1\/4” Line Out, FX Send, FX Return, FX Level Switch, Unbalanced 1\/4” Line In, Speaker Impedance select 2\/4, 8 or 16 Ohms, Speaker Out, Remote Footswitch jack, Ground Lift, Mains Fuse, AC Input\u003c\/li\u003e\n\u003cli\u003eCarry bag and rack kits are available and sold separately\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cb\u003eOUTPUT POWER: \u003c\/b\u003e100 Watts\u003cbr\u003e\u003cb\u003ePOWER TUBE COMPLIMENT: \u003c\/b\u003e2 x 6550\u003cbr\u003e\u003cb\u003eREACTIVE LOAD VOICING SWITCHES: \u003c\/b\u003eYes\u003cbr\u003e\u003cb\u003eFRONT PANEL LEVEL SWITCH: \u003c\/b\u003eYes\u003cbr\u003e\u003cb\u003eFRONT PANEL CONTROL SELECT SWITCH: \u003c\/b\u003eYes\u003cbr\u003e\u003cb\u003eVOLUME, PRESENCE \u0026amp; DEPTH CONTROLS: \u003c\/b\u003eTwo Sets, Switchable\u003cbr\u003e\u003cb\u003eLINE OUT: \u003c\/b\u003eRotary Level Control\u003cbr\u003e\u003cb\u003eDEDICATED FOOTWITCH JACK: \u003c\/b\u003eYes\u003cbr\u003e\u003cb\u003e2-BUTTON FOOTSWITCH FUNCTIONS: \u003c\/b\u003eChannel Select + FX Loop In\/Out\u003cbr\u003e\u003cb\u003eREMOTE BYPASS FOOTSWITCH COMPATIBLE: \u003c\/b\u003eYes\u003cbr\u003e\u003cb\u003eREMOTE BYPASS FOOTSWITCH ACCESSORY: \u003c\/b\u003eOptional\u003cbr\u003e\u003cb\u003eSPEAKER OUTPUTS: \u003c\/b\u003e1\u003cbr\u003e\u003cb\u003eWEIGHT: \u003c\/b\u003e16 lbs.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/gKwJv2BQ-jw\" height=\"200\" width=\"380\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e.","brand":"Fryette","offers":[{"title":"Default Title","offer_id":29040215064618,"sku":"17FRY000","price":1199.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/2433\/files\/PS100_Front.jpg?v=1723927199"},{"product_id":"fryette-power-load-ir-variable-reactive-load-box-with-cab-mic-emulation","title":"Fryette Power Load IR Variable Reactive Load Box with Cab + Mic Emulation","description":"\u003ch4 align=\"center\"\u003eThe Fryette POWER LOAD IR\u003cbr\u003eVariable Reactive Load Box with Integrated Impulse Response + Analog Cab\/Mic Emulation\u003c\/h4\u003e\n\u003cp\u003e\u003cb\u003eRecord Direct Using Your Favorite Tube Amp\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003eThe Fryette Power Load\u003cspan\u003e\u003csup\u003e™\u003c\/sup\u003e\u003c\/span\u003e IR combines the variable reactive load of the Award-winning Fryette Power Station\u003cspan\u003e\u003csup\u003e®\u003c\/sup\u003e\u003c\/span\u003e coupled to a tunable analog Cab + Mic Emulation system that allows you to \u003cb\u003esilently record\u003c\/b\u003e your favorite tube amplifier. Whether you are setting your tweed combo at the sweet spot or doing a full right hand sweep on your 100-watt head, the Power Load allows you to fine tune the reactive behavior the amplifier response, and the character of the Cab + Mic Emulation for unprecedented control of your recorded performance.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eLoad your own cabs, or use ours\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Power Load\u003cspan\u003e\u003csup\u003e™\u003c\/sup\u003e\u003c\/span\u003e IR gets an all new Digital Cab IR loader complete with memory space for 16 cabs, including our most popular cabs. You can also load your favorite cabs via the USB loader using the included PC and Mac enabled user interface.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Power Load\u003cspan\u003e\u003csup\u003e™\u003c\/sup\u003e\u003c\/span\u003e IR is the only stand-alone solution that provides two integrated cabinet sim options, Analog (for zero latency and expansive dynamic range) and Digital IR (for realistic room reflections and convolutions). You can use both individually or simultaneously. You can also defeat the cab sim and use an external IR.\u003c\/p\u003e\n\u003cp\u003eSixteen factory installed cabinet impulse responses come pre-loaded in the Power Load\u003cspan\u003e\u003csup\u003e™\u003c\/sup\u003e\u003c\/span\u003e IR. These can be modified using the included GUI, or you can install your favorite cab files via the USB connector on the front panel.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eProfessional-Quality Headphone Amplifier\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eA high quality stereo headphone amplifier with a stereo effects loop allows you to insert delays and reverb into the headphone mix, plus a Program Input that accepts a stereo music source such as a CD or MP3 player or group practice mixer for an unprecedented level of performance.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003ePerform Live\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eFor live performance you can place the Power Load\u003cspan\u003e\u003csup\u003e™\u003c\/sup\u003e\u003c\/span\u003e IR in between your amp and cabinet, sending the XLR with either or both Cab sims direct to the \u003cb\u003eFront of House\u003c\/b\u003e PA and Monitor board.  No cabs? No Problem! You can crank your favorite amp silently, delivering dynamic consistent tone direct to the console.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eProven Design\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Power Load\u003cspan\u003e\u003csup\u003e™\u003c\/sup\u003e\u003c\/span\u003e IR offers incredible dynamics, feel and studio-quality performance in a convenient, affordable and lightweight portable package that sits neatly on top of any head or combo amplifier.\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eWith thousands of Power Stations in the field, you can be confident in the transparency, dynamic feel and reliability of the Variable Reactive Load.\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eThe analog Cab+Mic Emulation system, which was evolved from the highly-acclaimed Fryette Valvulator\u003cspan\u003e\u003csup\u003e®\u003c\/sup\u003e\u003c\/span\u003e GP\/DI, provides wonderfully realistic and responsive mic’d cabinet tones direct to your interface, mixer or headphones.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe Fryette Power Load\u003cspan\u003e\u003csup\u003e™\u003c\/sup\u003e\u003c\/span\u003e IR is the most comprehensive total reactive load solution available today.\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eRecording • Silent practice • Live performance\u003c\/b\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cb\u003eFeatures\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e• Award-winning Power Station\u003cspan\u003e\u003csup\u003e®\u003c\/sup\u003e\u003c\/span\u003e Reactive Load with Variable High and Low\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan class=\"Apple-converted-space\"\u003e  \u003c\/span\u003eFrequency Response \u003cbr\u003e• 200W Speaker Load Capacity\u003c\/p\u003e\n\u003cp\u003e• Works with any tube amp head or combo\u003cbr\u003e• Analog Cab \/Mic Emulation (Lo Mid, Hi Mid and high-end emphasis controls)\u003c\/p\u003e\n\u003cp\u003e• Digital IR Cabinet models (16 Impulse Responses, pre-loaded)\u003cbr\u003e• Silent Recording capability\u003cbr\u003e• Amp In with selectable Input Impedance (4, 8 or 16 Ohm)\u003cbr\u003e• Passive load will operate without external power\u003c\/p\u003e\n\u003cp\u003e• Cooling fan operates without external power\u003c\/p\u003e\n\u003cp\u003e• Operates with 12VDC 1A regulated power supply\u003cbr\u003e• Phase Reverse Switch for passive direct, active direct and IR direct outs\u003cbr\u003e• ¼” AUX input with -20dB pad\u003cbr\u003e• Headphone amp with dedicated FX Loop\u003cbr\u003e• ¼” Headphone output\u003cbr\u003e• XLR and ¼” transformer-isolated direct-only outputs\u003cbr\u003e• XLR and ¼” Cab + Mic Emulated outputs\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• \u003c\/span\u003eCarry bag sold separately\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• \u003c\/span\u003eDimension of product: 8.75 in. x 6.15 in. x 2.75 in.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• \u003c\/span\u003eWeight: 8 lbs\u003c\/p\u003e\n\u003cul type=\"disc\" data-mce-fragment=\"1\"\u003e\u003c\/ul\u003e","brand":"Fryette","offers":[{"title":"Default Title","offer_id":38407593230517,"sku":"17FRY004","price":699.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/2433\/products\/PLIR_AngleLeft.jpg?v=1635811999"},{"product_id":"fryette-zmacs-impedance-matching-amp-cab-selector","title":"Fryette Amplification ZMACS 4x4 Impedance Matching Amp \u0026 Cab Selector","description":"\u003ch4\u003eFryette Amplification introduces ZMACS, the world’s first and only selectable and programmable Impedance Matching Amp \u0026amp; Cab Selector!\u003c\/h4\u003e\n\u003cp\u003eMultiple amplifier and speaker cabinet selector systems have been around for decades and offer a wide variety of features and functions. Yet, in all that time, not one of these products has been designed to address the single most important application question surrounding mixing and matching tube amps and speakers: “It is safe to mismatch the impedance of my prized vintage amps and cabs?”\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMost vacuum tube guitar amplifiers require that the user manually set the amplifier output impedance to match the impedance of the speaker cabinet. Moreover, tube amplifiers require connection to a specific impedance load to operate properly, maintain tone and avoid damage to the output tubes and transformer.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eToday’s users own a wide variety of vintage and modern vacuum tube amplifiers, all of which exhibit lesser or greater degrees of sensitivity to their applied external loads. This is an esoteric operating condition not well understood by producers of amp switchers, let alone the average user, and raises the possibility of damage to expensive, and possibly irreplaceable vintage gear, as well as expensive to service modern tube amplifiers. Even when running at conservative volumes, an impedance mismatch\u003cbr\u003ewill at the very least cause highly apparent tonal alterations.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eGiven the importance of this inescapable tube amp operating requirement, why don’t any amp switcher producers offer a solution? The truth is, all of these products answer this question the same way: “It really doesn’t matter.” At Fryette Amplification, they strongly disagree. It does matter!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHere’s why:\u003c\/strong\u003e\u003cbr\u003eIn order to safely use any of the currently available amplifier\/cabinet switching systems, the user must either manually set each amplifier to operate correctly into the desired load, or operate a given amplifier or speaker cabinet (load) at a relatively benign mismatch and hopefully avoid any potential consequences.  If the selected alternate cabinet is not the same impedance as the amplifier connected to it, the user may be unable to select the correct impedance to maintain optimum safety and tonal quality for that cab.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFurthermore, in a complex system involving many amplifiers and cabs\/loads, the wiring and electrical connections are all in the rear of the units and are often difficult to access, especially when one wants to change quickly to an otherwise incompatible combination. Thus, to avoid user interruption during play and\/or performances, the user may choose to overlook the resulting impedance mismatch, rather than stop to make the necessary settings changes for optimum tonal response.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlayers who have complex home, studio, and\/or live performance systems need a simple, reliable and safe solution that eliminates the shortcomings and inconvenience of currently available switching systems.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eEnter the ZMACS. A patent pending high quality, simple to operate and enormously flexible solution.  Once you hear the ZMACS difference, you’ll never want to go back.\u003c\/p\u003e\n\u003cp\u003e\u003ciframe title=\"YouTube video player\" src=\"https:\/\/www.youtube.com\/embed\/RRkmxDkMyDE?si=2Gts-Evd3n4YKYZn\" height=\"200\" width=\"380\" allowfullscreen=\"\" referrerpolicy=\"strict-origin-when-cross-origin\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eFEATURES\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAllows switching between any of 4 amplifiers, 4 cabs and 2 attenuators.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eAllows selection of 2 cabs simultaneously.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSafely handles 100 watts of continuous amplifier power.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eBuilt-in high-fidelity audio grade impedance matching transformer.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSelectable Amp impedance - 2\/4, 8 and 16 Ohms (programmable).\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSelectable Cabinet impedance - 2\/4, 8 and 16 Ohms (programmable).\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSafety internal load for each unused amplifier output.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSwitched and unswitched attenuator loops.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eFront and rear panel instrument inputs.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003ePassive and active (buffered) instrument inputs. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eLink Out for ganging multiple switching units.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eFully MIDI programmable and simple to operate.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eLast used preset memory. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eSilent switching in all modes with no dropouts, pops or clicks.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eTransformer isolated amplifier input sends eliminate annoying ground loop issues. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eRemote switching control port controls Power Station PS-100 channel and loop select functions.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003eQuickSwitch mode allows simple preset selection when MIDI is not required.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli aria-level=\"1\" dir=\"ltr\"\u003e\n\u003cp role=\"presentation\" dir=\"ltr\"\u003e\u003cspan\u003e100% analog signal path\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c!----\u003e","brand":"Fryette","offers":[{"title":"Default Title","offer_id":46078806655219,"sku":"17FRY010","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/2433\/files\/ZMACS_Front_Perspective__44702.jpg?v=1733784346"},{"product_id":"fryette-valvulator-gpdi-ir-direct-recording-tube-amplifier","title":"Fryette Valvulator GPDI\/IR - Direct Recording Tube Amplifier","description":"\u003ch2 dir=\"ltr\"\u003e\u003cspan\u003eSounds like a tube amp, because it is a tube amp\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Valvulator\u003c\/span\u003e\u003cspan\u003e®\u003c\/span\u003e\u003cspan\u003e GPDI\/IR is a direct recording solution featuring an ultra-flexible \u003c\/span\u003e\u003cspan\u003eAll-Tube\u003c\/span\u003e\u003cspan\u003e one-watt guitar amplifier specifically designed to deliver genuine dynamic tube amp sound and feel through a speaker cab, headphones, direct to mixing console, boosted by an external power amp and direct to FOH for unmatched simplicity and utility everywhere and anywhere. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUse Ours or Load Your Own \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe GPDI\/IR is the only solution that provides two integrated cabinet sim options.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA Digital Cab IR loader complete with memory space for 16 cabs, including 8 of our most popular cabs. You can also load your favorite cabs via the front panel USB port. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eA tunable All-Analog cab filter for zero latency and expansive dynamic range.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eUse both individually or simultaneously. You can also defeat the cab sim and use external IRs.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eProfessional-Quality Reamp Solution\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe new GPDI\/IR includes a Unity Gain Direct Out for recording your raw guitar pickup output to a track, and a rear panel Reamp Input to reprocess that track into a new performance with no external accessories required.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eAdd A Channel\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis feature allows you to add the GPDI Clean and Overdrive sounds to virtually any existing rig. Using External Amp Mode, you can now connect the GPDI\/IR to any amp with an effects loop. Switch between normal and external mode remotely via an external footswitch or remote function. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eEffects Loop \u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThis long-requested feature allows you to:\u003c\/span\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eInsert effects between the GPDI\/IR tube preamp and tube power amp stage.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDrive the GPDI\/IR tube power amp stage from an external preamp, modeler or Synergy Modular System. \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eInsert effects into your signal path when running the GPDI\/IR in External Amp Mode.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDrive a Cab\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe One-Watt tube power amp stage in the GPDI\/IR will easily drive a 4, 8 or 16-Ohm 112, 212 or 412 cab. Then mic the cab and track at super low volume for quiet recording.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eDynamics Control\u003c\/span\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eThe Sag function on the GPDI\/IR has been refined to offer greater range, bloom, touch sensitivity and sustain regardless of pickup type. This is the key to natural touch sensitivity, pick attack and sustain unattainable from any modeler or standalone preamp.\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\u003c\/p\u003e\n\u003cp dir=\"ltr\"\u003e\u003cspan\u003eRecording • Silent practice • Live performance\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 dir=\"ltr\"\u003e\n\u003cspan\u003eFEATURES\u003c\/span\u003e\u003cb\u003e\u003c\/b\u003e\n\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eGround-Breaking Four Tube Amplifier delivers 1W into any cab impedance\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eLow Latency IR Loader\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eProprietary adjustable Analog Cab + Mic Sim with “Air” switch\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTube Buffered Direct Reamp Mode\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eVariable Dynamics (Sag) control\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eIntegrated reactive load when no speaker cable is connected\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eClean, Deliverance and Pittbull Mode Switch\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eTwo independent gain controls\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eRemote switchable More\/Less Gain switch\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eRemote switchable External Amp Mode switch\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eEffects Loop with Level switch\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDeep Switch\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eMost key functions operate simultaneously\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003ePractice or record at low volumes with or without a speaker cabinet\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eCarry bag and footswitch sold separately\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eDimensions: 8.75 (22 cm) X 6.125 (16 cm) X 2.75 (7 cm)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli dir=\"ltr\" aria-level=\"1\"\u003e\n\u003cp dir=\"ltr\" role=\"presentation\"\u003e\u003cspan\u003eWeight: 4.5 lbs (2 kg)\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fryette","offers":[{"title":"Default Title","offer_id":46639372861683,"sku":"17FRY011","price":999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0789\/2433\/files\/ValvulatorGPDI-IR_FrontPanel.jpg?v=1737474975"}],"url":"https:\/\/www.truetonemusic.mom\/collections\/fryette.oembed","provider":"Truetone Music","version":"1.0","type":"link"}